This time, we’re going to talk about How To Prune A Snake Plant. There is a lot of information about Can I Cut The Tips Of My Snake Plant on the internet, of course. Social media are getting better and better quickly, which makes it easier for us to learn new things.

Can You Cut Snake Plant Leaves And Replant and How to trim a snake plant? (Mother in law’s tongue) are also linked to information about How To Trim A Damaged Snake Plant. As for other things that need to be looked up, they are about How to Grow and Care for Snake Plant and have something to do with Snake Plant Propagation. How To Prune A Snake Plant - how to trim overgrown snake plant

212 Reference List: How To Prune A Snake Plant | Can You Cut Snake Plant Leaves And Replant

  • You can take the knowledge you’ve learned, buy a new sansevieria and promise it you’ll do better. Or, you might decide that you don’t have the conditions that a snake plant needs. Assess your environment and do a little research. Then buy a different indoor plant that will thrive in your space. - Source: Internet
  • House plants make a home feel warm and comforting. This is why we do our best to keep those plants thriving. Snake plants are a very easy plant to grow, but they still need care. This post should help you when problems arise. - Source: Internet
  • You should also be wary of the time of the year you conduct propagation. Typically, propagation takes much longer in winter. The process is faster during spring or summer when the growing conditions are right. So, this is the best time to propagate your snake plant. - Source: Internet
  • – This species has short leaves with yellow borders. Cylindrical snake plant, Sansevieria cylindrical – This snake plant has round, dark green, striped leaves and can grow to 2 to 3 feet (61 to 91 cm.). - Source: Internet
  • You shouldn’t need to prune your snake plant aside from occasionally removing any dying leaves or leaves that have just fallen over, which every-so-often happens to snake plants. Simply use a pair of clean, sharp scissors or shears to cut the leaf off at the base. (Note: If it’s a healthy leaf that has fallen over, you can propagate it! We’ll cover that in the next section.) - Source: Internet
  • Laurentii Snake Plants are a staple for your collection – period. Once you start paying attention you will notice them everywhere. Native to West Africa, they are scientifically classified as dracaena though were formerly and more commonly considered sansevieria or sansevieria laurentii. Often referred to as mother in law’s tongue, they add a striking vertical element to any room with their thick spiking leaves. The best thing about snake plants is that they are virtually impossible to kill. - Source: Internet
  • Start by removing the plant from its existing pot. If there is any resistance, gently squeeze the sides to release the compacted soil and roots. When the plant is free, loosen the roots and remove some soil around the base to get a closer look at the divisions. You can also rinse the crown with water to make it clearer to see. - Source: Internet
  • Snake plants can be grown from seeds, but it’s easier, quicker, and more reliable to propagate by other methods. Snake plant seeds tend to have low germination rates. It can take between three to six weeks before you see a seedling. - Source: Internet
  • Healthy snake plant leaves are green with some silver or yellow streaks. Yellow or brown leaves can indicate several conditions, including overwatering, pests, and root rot. You can remedy each of these conditions if you manage the plant’s water level appropriately. Overwatering causes root rot and stresses out the plant, making it more susceptible to pests. - Source: Internet
  • Repotting Flat pots with wide diameters are ideal for Sansevieria, as the plants develop thick rhizomes that spread horizontally just under the surface of the soil. Repot the plants as necessary in March or April. This is only necessary when the plants are completely rooted through, if the rhizomes push one another up out of the soil or grow over the rim of the pot. Some leaves may topple away over the sides on tall houseplants as the rhizome is not sufficiently anchored in the soil. This is also a sign that the time has come to repot your snake plant. - Source: Internet
  • Each section should have at least three rhizomes, a leafy top, or a snake plant pup attached. ( Note : A rhizome is an underground stem that sends out roots and shoots.) - Source: Internet
  • Once the roots are visible, identify points of division. You should be able to cut cleanly into the crown, with either side of the cut having plenty of roots left over to continue growth. You can split the plant in half or choose multiple divisions if it is big enough. - Source: Internet
  • It’s best to propagate during the growing season in the spring or summer. Dracaena plants can be divided easily during repotting if the plant is at least four inches tall. Alternatively, new shoots might emerge from the soil and can be potted independently. You can also propagate snake plants via cuttings. Follow these instructions for both methods. - Source: Internet
  • Sometimes you can let a sansevieria dry down naturally. But if the soil is very wet and you see signs of rot, it’s best to remove the wet soil altogether and repot. Remove the plant from the pot, remove the soil from the root ball, and check for rotting roots and rhizomes. Cut away these rotting parts, then repot the healthy plant parts in a fresh potting mix. - Source: Internet
  • Sansevieria francisii is another extraordinary sansevieria variety. This variety is much shorter than the others talked about in this article – it also has a distinctive The francisii succulent, too, grows into an upright, stalk-like position; however, the leaves on this plant slant outwards, rather than up. In addition to that, these leaves are less thick, as well as mixed with multiple green hues. - Source: Internet
  • It’s sad to admit that there’s no way to save the entire plant. But you can salvage the tops of the leaves. Take cuttings and propagate them. - Source: Internet
  • Snake plants thrive on neglect. They only need to be watered every two to six weeks, depending on a variety of factors. If they are in a bright spot, they will likely need to be watered more often than in a dark corner. Also, they should be watered less in the winter when they are resting. - Source: Internet
  • If there are no signs of bugs, the curling leaves might be caused by being watered a bit too much. The plant might be weighed down. Overwatering will also cause leaves to be soggy or mushy. Dry and brown tips: You might not be watering your Snake Plant enough! This is a durable plant but it still requires some watering when the soil is completely dry. - Source: Internet
  • You probably want more snake plants in your home because they are easy to grow and require little maintenance to thrive. In fact, a snake plant can survive on its own as long as you water it appropriately. Unlike other plants, you don’t have to go out and purchase new snake plants because it is relatively easy to propagate new plants from cuttings, leaves, and rhizomes. - Source: Internet
  • You can tell your snake plant is underwatered if the leaves are wrinkled or split. Healthy, well-hydrated leaves are firm, plump, and smooth. If the soil is dry, dusty, and gray, and you know it hasn’t been watered in several months, it is suffering from dehydration. - Source: Internet
  • Avoid fertilizing immediately after planting as this can lead to burning of the roots and leaves. The fresh soil the plants are in should be enough to keep them going for a while. After about two months, you can apply a suitable fertilizer if growth is slow. - Source: Internet
  • Optionally, you can skip the water rooting method. After cutting a healthy leaf from your plant, allow the cut end to callous over for 24 hours, and then pot it, cut-end down, in the cactus potting mix. It is a slow-growing plant, so it could take two months before you notice new growth. - Source: Internet
  • To root a snake plant leaf in LECA, rinse your LECA thoroughly and put a layer in the bottom of a mason jar. Then add the leaf cutting in and fill in around it with LECA for stability. Add water to the bottom of the jar—just enough to create a reservoir. The water shouldn’t come up to the bottom of the leaf cutting. - Source: Internet
  • On the other hand, if you want to retain the plant size, it should be pruned. Assuming you cut your snake plant by one third of its original size, it will need pruning around every 2-3 years. There are no strict rules here, so just follow your instincts. - Source: Internet
  • Additionally, they can survive low light levels, drought and have few insect problems. NASA research has even shown that snake plants are able to help keep the air inside your home clean, removing toxins such as formaldehyde and benzene. In short, they are the perfect houseplants. - Source: Internet
  • Check on your soil once every two weeks and only water when the topsoil is completely dry. Just like rooting in water, the cutting will take some time to root and grow into new plants. However, rooting in soil takes a little bit longer compared to rooting in water. - Source: Internet
  • And, did you know that snake plants are actually succulents? They store water in their leaves and rhizomes. Rhizomes are modified parts of the stem that grow underground. Certain plants use them for water and nutrient storage and to produce new plants. - Source: Internet
  • This method takes a lot longer than leaf cuttings. Use a pair of clean scissors or plant shears to cut a healthy-looking leaf away from the plant. Take the whole leaf, cutting it at the base. Place this in a clear container that is large enough to support the whole leaf, but only fill it a few inches with water, not so the entire leaf is underwater. - Source: Internet
  • For leaf parts, make sure that you use them put into the ground the right way around. After all, they grow roots only when they allowed to continue growing in their original growth direction. For development the cuttings need a lot of time and it may even take a few months before the little plants show themselves. Place the planter in a warm place and keep it moist, but not wet. - Source: Internet
  • So back to my massive living room plant…essentially this snake plant was two very large plants connected by a massive u-shaped rhizome. I couldn’t even tell which one was the mother plant! There were also loads of smaller rhizomes (the kind you’d cut off in the previous example). I simply cut the plant in half at the main rhizome and gently separated all of the roots. Then I replanted them. - Source: Internet
  • Snake plants are slow growers and they are also OK with being somewhat rootbound. Therefore, you shouldn’t need to repot them often. You’ll need to repot your plant every few years, and definitely repot it if roots are coming through the drainage holes or if the roots have cracked the pot. - Source: Internet
  • Snake Plants prefer to be in bright, indirect light. They can tolerate some direct sunlight if harsh light can be filtered. But they often prefer to grow in shady corners and other low-light areas (just not in the complete dark). Keep this in mind while picking a location for your new plant pal. - Source: Internet
  • I keep mine in indirect light and change the water every week or so when I water my plants. You can plant your cutting when roots begin to sprout. The first photo below is a vase I use for cuttings a lot. The second photo shows what one of the cuttings looks like after about two months of rooting. I told you it could take a while! I did have these in a really low light area though. - Source: Internet
  • Healthy snake plant leaves grow upward and stand erect, but too much water, insufficient light, or poor potting material can make the plant’s leaves droop or flop over. If you don’t use a well-draining potting mix, the soil becomes soggy and affects the foliage. Move the plant to a brighter location, reduce the frequency of watering, and change the soil to one that drains better, if necessary. - Source: Internet
  • Are your snake plant cuttings starting to turn soggy? You might still be able to save it. Remove it from the water asap and cut the rotten part off. If there is still a decent bit of leaf left, you can start over and try again! - Source: Internet
  • Because the snake plant belongs to the genus Sansevieria, its full scientific name is Sansevieria Trifasciata. The second word in its name, Trifasciata, comes from Latin. It means “marked with three bands.” Several snake plant varieties are variegated, which is a fancy way of saying that their leaves have different colored streaks. These colorful markings are why snake plants got the name Trifasciata. - Source: Internet
  • Let the cut leaf callus over for a few days, then plant each cutting with the bottom end down in well-draining soil. They’ll begin to root, but it can take a month or so to root and then another month to get new leaf growth. Like I said earlier in the post, this method definitely takes patience! - Source: Internet
  • If your sansevieria is not under or overwatered, all it might need is some grooming to look like it’s in tip-top shape again. It may seem wrong to prune snake plants, but you can! Just be sure to cut to the base of the leaf. Snake plant leaves grow up from the root system, so if you cut a leaf in the middle, that cut will always be there. - Source: Internet
  • There are two things to think about, trimming dead leaves and pruning your snake plant. If your snake plant has some leaves that are not looking right, or you feel as if it’s gotten too asymmetrical, you may want to prune it. Determine which of the leaves you want to take off, and using clean, sharp pruning shears, snip them off at the base of the plant. If the leaves are curled and weak looking, you can try simply giving them a gentle tug. If they’re done, they’ll pull up at the roots. - Source: Internet
  • The low-maintenance nature of these plants extends to their watering routine. As succulents, Snake Plants hold plenty of water in their tall and juicy leaves. They are used to dry soil in their native habitats and can’t stand being overwatered. - Source: Internet
  • Fertilizing Snake Plants Give the Sansevieria cactus fertilizer or a standard trade green plant fertilizer every three to four weeks from March to October. Ideally, you should add a liquid fertilizer to the plant’s water. It is better to give snake plants too little fertilizer rather than too much. Do not fertilize snake plants in the winter. - Source: Internet
  • Many succulents are short and squat because they’ve adapted to grow in arid climates, but not the snake plant! It’s a tropical plant known for its beautiful tall leaves and color variations. Some varieties have leaves with thick, buttery yellow edges, while others have striking dark green stripes. Interior designers love this plant, and so do we―it compliments any decor style and looks great in arrangements! - Source: Internet
  • And here are those same snake plants a few months later! You can see two in this picture. One is still really small and near the soil line—that is the third. The second, third, and fourth pictures below are updates from about 2 months later (the terracotta pot pics). - Source: Internet
  • Cut your plant and its root structure in half right down the middle. Plant each half in its pot with some succulent soil. Allow these plants to take root for a few days before you water them, and then water them as usual. - Source: Internet
  • After they have been propagated, the care of snake plants is very easy. Put them in indirect sunlight and don’t water them too much, especially during the winter. In fact, it’s better to let these plants dry out some between waterings. - Source: Internet
  • This method is easiest (if you can avoid rot) but generally takes the longest. I like to propagate snake plant cuttings by rooting them in water when one plant has a wonky leaf I want to snip off. Because why waste a good leaf when you can use it to grow a new plant?! - Source: Internet
  • The Chinese also think this plant brings good luck like the jade plant. They believe that the gods will bestow the eight virtues, including long life and prosperity, onto their caretakers. Even if this succulent didn’t bring us good luck, we’d still keep it around because it’s so pretty! - Source: Internet
  • Sometimes, you may want to propagate your snake plant because you have accidentally overwatered it, and now it is showing clear signs of root rot. If the root rot hasn’t spread too much, you can still save your plant. Unfortunately, many gardeners only notice the signs of root rot when it is too late. - Source: Internet
  • I have a confession to make: I really over loved my Snake Plant. Like REEAAALLLYY over loved it. And by over loved, I mean of course, over watered. : ( If this has happened to you, don’t despair! Here is one way to try and save face, along with your rotting plant friend. - Source: Internet
  • Propagating snake plants is easy since they are such prolific growers. This can be done through division or leaf cuttings, and either way will result in new growth in as little as a month. Division is considered the most reliable method of propagation and requires cutting out one or more leaves along with the attached roots and replanting this part of the plant in a new pot. This is best done in the spring during the plant’s active growth phase. - Source: Internet
  • The easiest propagating mix is simply a succulent or cacti potting mix. This is great for pups or divisions where the plant won’t need transplanting later on as it is already in the right soil mix. The loose and well-draining consistency is also useful when propagating from leaf cuttings. - Source: Internet
  • Mealybugs are often mistaken for mold because they’re white and fuzzy. If you see many white, faint spots on your plant, grab some isopropyl alcohol and put it in a spray bottle or on a q-tip. Spray or wipe the affected areas with alcohol. Do this as many times as it takes to eliminate all the mealybugs. - Source: Internet
  • For maintaining the size of your snake plant without repotting or dividing it, regular pruning is the only option. Luckily you don’t have to do it very often. Follow these simple steps to get your plant in a perfect shape. - Source: Internet
  • One important thing to remember is, pruning tends to put a snake plant under stress. So, if your plant is not healthy, first improve the general caring conditions. Get rid of the pests, place the plant in bright indirect light and water it as needed. Especially if you have a smaller plant, let it grow some more healthy leaves before pruning the old ones. - Source: Internet
  • Round, extremely long and upright growing leaves are indicative of the cylindrical snake plant (Sansevieria cylindrica). They are available in lots of sizes. Their green or gray leaves are also laced. - Source: Internet
  • Before cutting any leaves, check the plant’s health to make sure it is healthy enough to be pruned and to identify any damaged leaves that should be removed. If the plant is in poor health due to overwatering, insect infestation or another issue, allow it to recover to avoid overstressing the plant by pruning it. Snake plants are hardy enough that they can be pruned at any time of year, but they will recover quicker if you remove leaves during the active growth phase in spring or early summer. - Source: Internet
  • Developing new pups (young leaves) and removing old leaves is a natural cycle of a plant. In case of the Mother in law’s tongue, the dying leaves are usually on the outer radius. And, new leaves arise from the center of the rosette. Placing the plant in a very dark area of the house may also cause the leaves to die. Old dead leaves should be removed to preserve the fresh appearance of the plant. - Source: Internet
  • Snake plant is a tropical plant that can die in temperatures consistently lower than 50 degrees Fahrenheit or if affected by a wintery frost. Bring the plant indoors before temperatures drop that low. Keep the snake plant in a warm room, protected from cold drafts, and maintain the soil on the drier side. During the winter, snake plants enter dormancy and will stop growing. In the winter, you will only need to water the plant every six weeks or so. - Source: Internet
  • Snake Plants come from the tropics, requiring warmth and humidity to grow their best. They face damage when exposed to the cold and shouldn’t be left in temperatures below 40F. They are more tolerant of cold than other houseplants but grow far better when temperatures are higher and consistent at around 75°F throughout the year. - Source: Internet
  • Gently untangle any tangled roots, keeping them as intact as possible. Pot the separated plants into a pot with good drainage. You can plant them in separate, smaller pots or all together in one larger pot. Once you’ve potted up your plants, water them and care for them as you normally would. - Source: Internet
  • The name of this variety comes from the plant’s curled leaves. It can sometimes resemble a bird nest. Sansevieria Trifasciata ‘Golden Hahnii’: A dwarf variety, the leaves form clusters as they grow. The shape is a rosette pattern. They grow only 12″ high. - Source: Internet
  • One of the easiest ways of propagating a snake plant is rooting the cutting in clean water. This is the best way to grow broken or bend parts into new plants. It is also an excellent way to turn the extra leaves into new plants instead of throwing them away. - Source: Internet
  • Now, place your plant in the new pot and see where it sits. You’re good to go if your plant sits one to two inches below the pot’s rim! If not, add or remove soil until it’s positioned correctly. Allow your succulent some time to adjust to its new pot before you water it―a few days is usually enough. - Source: Internet
  • Snake plants prefer warm conditions and will suffer if exposed to temperatures below 50 degrees Fahrenheit. Set the plant in a place where it will be protected from drafts. A temperature range between 70 and 90 degrees Fahrenheit is best. Frost will kill this plant. - Source: Internet
  • Snake Plants are not difficult to care for and require almost no attention. In fact, they generally grow better when left alone compared to being fussed over. They don’t even need to be fertilized, preferring low-quality soil to grow their best. Repotting when the plant outgrows its container is about all you’ll need to consider when choosing a Dracaena trifasciata. - Source: Internet
  • Let the cutting dry and heal for one or two days, then plant it in a clean potting mix. Water it well and let the excess water drain completely. Don’t let the potting mix get too dry or wet because the cuttings can easily rot in soggy soil. - Source: Internet
  • There are many reasons why you would want to propagate a snake plant. First, you may be looking to reuse a damaged leaf or stem with sunburn marks. When exposed to direct sunlight, these plants tend to suffer sunburns. So, instead of cutting off the sunburn sections and throwing them away, you can turn them into new plants. - Source: Internet
  • Perhaps the one downside of snake plants is that they can be mildly toxic to humans and quite dangerous to pets. If eaten, swelling, numbness, mouth pain, nausea, vomiting and diarrhea may occur. While most pets avoid eating this plant, it is still advisable to keep these wonderful houseplants away from kids and pets. - Source: Internet
  • You should let your snake plant dry out between waterings. How often that will actually be depends on factors like your climate and light level. In hotter climates and in brighter light, the plant will dry out faster. - Source: Internet
  • Snake plants are not picky about soil. Any well-draining potting soil should do the job. Fertilizing should only be done about two or three times in the entire growing season with a succulent or general house plant fertilizer. - Source: Internet
  • To propagate a snake plant by its rhizome, use a clean knife to cut off the rhizome from the plant it’s growing off of. Try to avoid the roots, but it isn’t a huge deal if you cut some of them. This is a resilient plant! - Source: Internet
  • We should allow the soil to dry between watering and try not to rot the roots. Snake plants can sustain even if we water it once a month. In winter, watering once a month is fine. So, water less frequently in winter and more in summer. - Source: Internet
  • You can’t see anything going on under the surface of the soil, so it feels like it takes forever. The roots needs to develop, then the babies. The babies will eventually begin sprouting their own roots and then sprout above the surface of the soil. New plants! Yes, it takes forever, but it’s a super cheap way to grow new plants. - Source: Internet
  • So, can you cut off a piece of snake plant and plant it? The simple answer is “yes.” Propagating a snake plant from a cutting is relatively simple, and rooting the cutting in water is almost foolproof. All you need to do is treat the cutoff part and root it in water or soil. Other than cuttings, you can also propagate a snake plant by division or from a rhizome. As long as you follow the correct procedure, you will have more snake plants in no time. - Source: Internet
  • You don’t have to prune snake plants, so if you want to skip it, go ahead. That being said, pruning can be useful for maintaining the size of your snake plant, removing damaged leaves and modifying the shape of the plant. If you want to keep your snake plant in the same container its entire life or want to keep it from getting too large for its space in your home, you’ll probably want to prune periodically to prevent it from becoming rootbound. Because these plants are slow growers, you shouldn’t need to do so more than once a year. - Source: Internet
  • It’s beautiful, but it was getting really big and some of the interior leaves weren’t doing as well. So I decided to divide it. I took the entire plant out on a tarp in the living room, brushed off the dirt, and found that the plant was connected by two very large rhizomes. (No pics of that—it was super messy.) - Source: Internet
  • If a leaf on your snake plant begins to become brown or mushy, it likely has a disease. This is not a big deal. Use a clean pair of shears to cut off this leaf and your plant should suffer no further consequences. - Source: Internet
  • You can propagate your Laurentii Snake Plant in multiple ways. The simplest way is by division. To divide and propogate the Snake Plant, you will gently un-pot the plant and divide up the leaves (with their respective roots) into two or three groups. Then you’ll finalize the process by quickly repotting them all. This method gives you attractive and mature looking plants right away. - Source: Internet
  • But then about 8 or so months later of ignoring this plant, never checking it, and occasionally adding a bit of water to it…and one day I noticed this! It’s growing an entire new snake plant in water. Crazy. I cut it off and planted it to see if I can get some of the deep green color back! - Source: Internet
  • The Snake Plant is one of the most adaptable and robust houseplants you’ll ever come across. Its durability is unmatched, making it perfect for first-time plant owners and apartment dwellers with a lack of light and other resources. No matter the hardship, this member of the Lily Family will provide a striking architectural shape thanks to its bold foliage design and a pleasing green and yellow color combination that boosts the decor points of any space. - Source: Internet
  • Once you’re finished planting, water thoroughly to keep the soil moist. This will encourage new root growth and will stop the cuttings or divisions from drying out. Move the pot to a warm and bright spot to encourage new growth and limit the adjustment period the plants will need after all that stress. - Source: Internet
  • Snake plants don’t like too much water, so you want to make sure the soil isn’t too densely packed. But if your plant shows the signs of dryness and brown tips, your soil might be too loose. You can always re-pot your snake plant to make sure it has the right mixture for its roots and needs. - Source: Internet
  • Fresh soil (optional). If you are going to repot, use a potting mix specifically designed for sansevieria or a mix labeled for cacti and succulents. You can also make your own. Here’s a good recipe for houseplants that need a well-draining soil: 1 part potting mix 1 part peat moss or coco coir 2 parts sand or perlite - Source: Internet
  • With snake plants being a member of the succulent family, it’s often easier to overwater them than underwater them. However, it can be done. This happens when the soil gets too dry before you water the plant again. Because we often worry about overwatering succulents, it can sometimes lead us to wait too long between waterings. You’ll notice the lack of water when the plant’s leaves start to turn brown at the tips. - Source: Internet
  • The most common issue people notice with their snake plants is root rot caused by overwatering, which will result in the leaves being squishy and floppy at the base. Fortunately, these plants tend to recover from this issue fairly well once the soil has been allowed to dry out for a sufficient time. If the leaves continue to show signs of distress, though, remove the plant from the pot, cut away all rotting leaves and roots and then repot the healthy remaining portion of the plant in fresh soil. - Source: Internet
  • Diseases and Pests The snake plant is a very robust plant even with moderate care and in sub-optimal conditions; it even forgives major care errors. Pests and plant diseases are also quite rare with this houseplant. Brown colored or limp leaves are generally caused by root rot, waterlogging or temperatures that are too low. The most frequent pests on snake plants are mealybugs. The plants are also occasionally infested with spider mites when they are in dry, heated air. - Source: Internet
  • Growth Sansevieria is a herbaceous succulent that does not form any upright plant stems. The basal leaves shoot out as small, fat rhizomes. They always end in a green, prickly point that also earned the plant the epithet “mother-in-law’s tongue”. - Source: Internet
  • Here’s an update of a few of these cuttings a few months later. It took about 4 months for the cuttings to root and begin to sprout new growth—new plants! Once I saw the new growth sprouting, I pulled the cuttings out and cut down the original cutting, burying it in fresh soil. Now we wait for the new plants to emerge! - Source: Internet
  • Repotting a snake plant is pretty straightforward, but you still need to know a few things. Snake plants like to be root bound, so each time you repot yours, choose a pot only a few inches larger than the old one. The pot you pick should have a drainage hole because snake plants can rot if they sit in any water. - Source: Internet
  • Due to it being such a widespread species, there are around seventy different types of sansevieria varieties available. Although each of these additional sansevieria plants have their own unique features, these varieties have more in common than you may think. Therefore, I’ve compiled a short list of just some of the well-known varieties to give our readers a better understanding as to what each plant has to offer – read on to learn a little bit more about them! - Source: Internet
  • Flowers With good care, older Sansevieria sometimes display small, green-white, fragrant flowers. The special thing about these is: Snake plant flowers open at night. They are arranged similarly to panicles on a narrow shaft that reaches heights of up to two-thirds of the leaf length. - Source: Internet
  • How do you take care of Snake Plant Laurentii? Laurentii Snake Plants are fairly low maintenance so as long as you remember to water them and provide indirect sunlight, your plant will thrive! How tall does a Snake Plant Laurentii grow? A Snake Plant Laurentii can grow anywhere from 8 inches to 12 feet tall if you let it. If you want your plant to grow that tall there are various tactics to encourage it to grow upwards. Is Sansevieria Laurentii a snake plant? Yes, the Sansevieria Laurentii received the informal name of the Snake Plant due to its long, tapered leaves that seem to shoot up like snakes out of the ground. Do all snake plants clean the air? Yes! Snake Plants are excellent air purifying plants for your home. Studies from NASA have shown that the plant is effective in getting rid of toxic substances such as formaldehyde, xylene, toluene, and also nitrogen oxides. - Source: Internet
  • Hey all, this post is a follow-on to my how to care for your snake plant post! Now that you have all of the care tips, let’s talk about how to propagate snake plants. Snake plants are one of the absolute best plants to propagate. It’s easy, but there are five different ways to do so: by rhizome, by division, by cuttings rooted in well-draining soil, by cuttings rooted in water, and by leaf cuttings in LECA. (See my DIY succulent soil recipe here.) - Source: Internet
  • Ease of care is not the only benefit of growing Snake Plants. As part of the NASA Clean Air Study, Sansevieria trifasciata was found to remove several harmful compounds from the air, including benzene and formaldehyde. Although you would need a few hundred plants to replicate the same results, you can start to build up this collection by propagating. - Source: Internet
  • It is also called bird’s nest snake plant, it grows to only about six inches tall. Its leaf clusters form a bird’s nest clump. Dracaena angolensi (formerly Sansevieria cylindrical): This cylindrical snake plant has round, stiff leaves that can reach several feet in length. The leaves arch outward from a central crown. - Source: Internet
  • Snake plants are quite pest resistant. Although it is uncommon, they can get mealybugs and spider mites. If you suspect that your plant has either pest, you can rinse off all of the leaves and then spray or wipe them down with either neem oil or a mild dish soap and water mixture. You should continue to do this until you no longer see signs of pests. - Source: Internet
  • With the right care and in the right conditions, your Snake Plant will likely do all the hard work for you. These succulents produce baby versions of themselves, known as pups, right next to the main plant. This is how they naturally spread. - Source: Internet
  • You don’t need to mist your snake plant, they tolerate low humidity levels very well. However, if it’s extremely arid, they will enjoy occasional misting. Just make sure the leaves never stay wet for long periods of time. - Source: Internet
  • Snake plants are sensitive to water and prone to root rot, so it’s essential to plant them in soil that drains well. Commercial succulent or cactus soil is great for them because it has added sand that helps with drainage. Read our best soil article to understand the best soil mix for your succulents. - Source: Internet
  • Propagating by division is perfect for a plant that has outgrown its existing pot. It may be bulging slightly at the sides or has roots growing through the drainage holes, indicating it is in need of some extra space. Dividing and repotting go hand in hand and allow you to complete two messy tasks at one time. - Source: Internet
  • To keep your snake plant healthy and happy, try placing it near an east-facing window. These windows provide a few hours of direct sunlight in the morning and indirect sunlight for the rest of the day, perfect for this plant. If you want to keep it close to brighter south or west-facing window, just make sure to shield it from the sun’s rays by closing the blinds a little. Too much direct sunlight will burn the leaves of your snake plant. - Source: Internet
  • In my experience, it takes anywhere from 1–3 months to propagate a snake plant. To root a snake plant in water or LECA, I’ve found it takes a while. I have not had a ton of luck propagating snake plant cuttings in water lately and instead have switched to LECA to avoid rot on the cuttings. - Source: Internet
  • 13.Why Are My Snake Plant Leaves Falling Over? | Joy Us Garden 11 Feb 2021 · How to Fix the Snake Plant Leaves … Cut the leaf all the way down to the soil line. Make sure your pruners are clean and sharp to avoid a jagged … - Source: Internet
  • If you’re want to learn how to grow thriving houseplants all year round, then my Winter Houseplant Care eBook is essential. It will show you all you need to know in order to care for any type of houseplant you have. Download your copy today! - Source: Internet
  • In 1794, the Swedish natural scientist Carl Peter Thunberg brought the plant to Europe and gave it the botanical name Sansevieria. Its namesake is Raimondo di Sangro, Count of San Severo, a well-known Italian scientist and inventor from the 18th century. Over time, the desert plant has adapted wonderfully to life indoors. The snake plant has been thriving as an exotic pot plant next to sunny windows for generations. Many breeds of the wild species of Sansevieria trifasciata have become very important as houseplants and office plants as they require very little care. - Source: Internet
  • Keep an eye out for snake plant cuttings that become mushy starting from the bottom up, and eventually turn brown or black. This means the cutting is rotting. You don’t want this. - Source: Internet
  • Propagating rhizome cuttings is pretty much the same process as propagating leaves. If you’re not familiar with rhizomes, they’re like roots, except they grow horizontally. Plants that have them use them to store nutrients. Rhizomes sometimes sprout up through the soil near your main plant and grow new leaves. They can be cut and used to develop new succulents. - Source: Internet
  • Let the sections callus over for a few days before planting them. (Important: Keep track of the bottom parts on each section.) - Source: Internet
  • Inspect your plant for signs of damage. Also, keep an eye on their shape and size. Use a sharp, sterile pair of pruners to cut off your chosen leaves. You can also use a sharp knife if preferred. Make sure you’re cutting them at the soil line. - Source: Internet
  • I will say, however, that occasionally trying to root snake plant leaf cuttings ends in rot. If you don’t see roots after several weeks and the end of your leaves are beginning to get brown and mushy, water rooting might not be working out. I had this happen recently with a whale fin snake plant (masoniana) leaf cutting I was trying to root in water. Check it out…some tiny roots, but it was staying like this FOREVER. - Source: Internet
  • Before repotting the snake plant, place a layer of clay fragments over the holes in the pot. Fill a thin layer of clay granulate at the very bottom for drainage. You only need to change the top soil layer each year for larger plant containers. As the thin-growing, tall snake plant species can become top-heavy, you should place them in heavy pots or planters. Pot the snake plant at the same height as it stood previously. - Source: Internet
  • This two-foot-tall snake plant is available online to be delivered straight to your door. It comes in a simple grower’s pot but can be slipped inside of a decorative basket or pot without even repotting it. It’s a super-easy way to add a new house plant to your collection without leaving your home. Click here for this plant on Amazon. - Source: Internet
  • You can prune a Snake Plant any time of year. This is a durable and slow-growing plant that will tolerate pruning whenever you feel it’s necessary. But it’s always best to prune them when the plant is actively growing, so in the spring or early summer. - Source: Internet
  • This plant has twisted leaves striped horizontally with yellow variegated edges. It grows about 15 inches tall. Dracaena trifasciata ‘Bantel’s Sensation’: This snake plant grows about three feet tall and has narrow leaves with white vertical stripes. - Source: Internet
  • When it comes to sunlight requirements, you’ll be happy to know that just about anything will do. Ideally, the plant should be grown in indirect light, but it can grow in complete shade or in direct, bright light too as long as it’s not too hot. Keep in mind that direct sun that is too hot can scorch the leaves, and too little light could leave the leaves less brightly colored and a little floppy. Light levels affect growth, with plants in low light growing more slowly than those getting sufficient light. - Source: Internet
  • In addition to its scientific name, the snake plant has a few nicknames. It’s often called mother-in-law’s tongue because of its sharp, pointed leaves. If you ever buy this succulent for your mother-in-law, don’t tell her what it’s called! - Source: Internet
  • It is a succulent plant and holds a lot of water in its leaves. Its leaves will become soggy if we over water it and droopy if we provide less water. Watering once in 14-15 days is fine but, it depends on factors like Potting material and Season. - Source: Internet
  • You’ll know it’s the right time to repot your Snake Plant when roots are visibly coming out the drainage holes of the pot. Certain pots might even begin to bulge. The plant itself may also seem stuck, meaning its home is getting a bit too tight. - Source: Internet
  • Sometimes, people notice small reddish-brown spots on the leaves. This is usually caused by someone misting the leaves of the plant, which results in fungal growth. To treat this, remove the affected leaves and only water the soil around the plant and not the leaves. - Source: Internet
  • Sanitation of cutting tools is very important to avoid the spread of disease from one plant to another. It also reduces the chances of bacterial infection on exposed parts. Make sure your tools are sterilized properly before using them. Using rubbing alcohol is easy and works great. Else you can steam the tools over boiling water for 20 minutes. - Source: Internet
  • Once you’ve successfully propagated your plant, there are a few important care factors you’ll want to make sure you provide. Doing so will help to ensure the successful growth of your newly propagated plant. Let’s take a deeper look! - Source: Internet
  • If you are new to keeping plants, the Snake Plant is the perfect start for you! The Snake Plant is one of the most low maintenance indoor plants available. Many people say you have to TRY to kill this durable houselpant. Lack of water and lack of sunlight won’t stop this plant from thriving. But if you want to offer your Snake Plant the best care possible, we have some advice below to keep your plant bright and strong. - Source: Internet
  • If you keep your plant inside, that’s ideal. Snake plants do best in temperatures between seventy and ninety degrees, so indoor environments are perfect. They’ll reward you for keeping them indoors by purifying the air you breathe. They remove toxins like formaldehyde from the air and release lots of oxygen, improving the air circulation in your home. - Source: Internet
  • After a few days, plant the cuttings into your potting mix with the bottom parts down. The cuttings should be sticking up out of the potting mix, kind of like miniature snake plants. Then, water them and care for them how you normally would with a snake plant. - Source: Internet
  • Leaves curling or falling over: One of the most common reasons this happens to Snake Plants is thrips, a small black insect. They will infest the Snake Plant, eventually killing it. Remove damaged leaves and then wipe the plant down with a moist, clean cloth. Spray the plant with neem oil a few times a week for a month. - Source: Internet
  • Brown tips on your snake plant indicate that your plant has been stressed at some point. Those brown spots are actually dead areas of the plant, so cutting them off won’t hurt the plant. Just keep in mind how you want the plant to look overall and cut carefully. If you have a bit on the side of the leaf or at the tip, you may want to cut just to the edge of the brown. This way, you won’t be cutting into healthy plant tissue. - Source: Internet
  • The best place to put your snake plants outside is in the shade. While they can be planted in areas with full sun, we don’t recommend it. In full sun, they’re much more likely to develop symptoms of sun damage, like dark brown spots on their leaves. You’ll also have to water them more often because the heat from the sun causes the soil to dry out faster. If you’re not always great at remembering to water your plants, keep them in the shade! - Source: Internet
  • I’ve taken a few pics of a small rhizome starting to sprout from the mother plant below. They kind of look like garlic at this point. To propagate a snake plant by rhizome, use a clean, sharp knife to cut the rhizome off of the main plant. Best practice is to let the rhizome callus over for a few days before planting it. - Source: Internet
  • This variegated snake plant has creamy yellow leaf margins. To propagate this plant, it must be divided rather than propagated from leaf cuttings. Dracaena trifasciata ‘Twisted Sister’: This plant has twisted leaves striped horizontally with yellow variegated edges. It grows about 15 inches tall. - Source: Internet
  • The best planter type for a Snake Plant is terra cotta pots. That’s because they allow the soil to dry out a lot more easily than plastic pots. This proud plant prefers to grow in a slightly small pot. - Source: Internet
  • Removing damaged parts of your Snake Plant is one of the common reasons to prune it. While their leaves can last for years, the damage that develops will stay on the leaves permanently. Damage can happen from excessive sun, overwatering, or pests. - Source: Internet
  • If you have a very large snake plant, the best method is likely to propagate it by division. This is similar to propagating it by rhizome and is the method I used recently on my very large snake plant in the living room. The first photo below is the plant before I divided it. - Source: Internet
  • There are around 70 different species of snake plant, all native to tropical and sub-tropical regions of Europe, Africa, and Asia. They are all evergreen and can grow anywhere from 8 inches (20 cm.) to 12 feet (3.5 m.) high. - Source: Internet
  • The Snake Plant doesn’t need to be watered frequently. In fact, it’s recommended that you DO NOT water this plant a lot. Before watering, always check to make sure the soil is dry. You can use a toothpick to see if the soil below the surface is moist. Hold off on watering if you see or feel any moisture. - Source: Internet
  • From our many years of experience, it usually takes between one and three months to propagate a snake plant. However, rooting your snake plant cutting in water might take some time. Some people choose to root their cutting in LECA over water to avoid rot on cuttings. - Source: Internet
  • This is done by diving the rhizome. A rhizome is a modified part of the stem that grows underground on certain plants. They store water and nutrients and produce new plants. - Source: Internet
  • It’s essential to wait until a rhizome sprouts a leaf before cutting it. Once that happens, take a sharp garden knife and cut the rhizome as close to the bottom as you can. Allow the cutting to dry out for a few days, and then plant it in soil, cut side down. Water this cutting the same way you watered the leaves. - Source: Internet
  • Get your succulent soil and fill the new pot about a third of the way entire when you’re ready to repot. Support your succulent by placing your hand on the ground and gently turning the pot over. Your plant should pop right out, but if it doesn’t, try tapping on the sides of the pot a little. Try watering it if it doesn’t want to come out no matter what you do (we’ve all been there). Soaking the soil will loosen the roots and make it easier to get your plant out. - Source: Internet
  • Snake plants prefer a loose, well-drained potting mix. This plant will do well in sandier soils. Use a potting media low in peat content. Peat works well in many situations, but it can become tightly packed and sometimes has problems rehydrating or draining. An all-purpose cactus potting soil is a good choice. - Source: Internet
  • In case of infected leaves, make sure you dispose of them properly. Don’t keep them near other healthy plants to prevent contamination. If there is a fungal infection, be certain to check the soil as well. Fungus like Southern blight can affect the soil surface too. In that case, you might have to replace the soil. - Source: Internet
  • Snake plants are one of the easiest plants to maintain, multiply, and keep for years, whether you’ve got a green thumb or not. The biggest snake plant health problems center around watering. Overwatering causes plant diseases like fungal infections and root rot. - Source: Internet
  • Yes! Absolutely. Pruning is often necessary with most houseplants. But sometimes snake plants can just get leaves that go astray. I simply cut the leave off down near the soil—just below the soil line, if I can—and put it in water. Mason jars or vases are both good options, especially since the cuttings can sometimes be top heavy. - Source: Internet
  • Once your leaf cutting sprouts roots, you can plant it in soil and keep the soil moist. Cut back on watering once can gently pull on the leaf cutting and get some sort of resistance. That means the cutting is starting to spread its roots! You’ll see new growth sprouting soon. - Source: Internet
  • For a plant like this, sometimes the best thing you can do is set it and forget it for long periods on end. These plants are spectacular, unique, and easy. Every plant parent needs to have at least one. - Source: Internet
  • Snake plants are susceptible to many common houseplant pests such as scales, gnats, spider mites, aphids, mealybugs, and whiteflies. You can avoid an insect invasion if you keep your plant healthy. Insects usually attack a plant when it suffers from environmental issues like incorrect water levels, humidity, and air circulation. If you notice insects on your plant, remove the insects by picking them off, by using a gentle spray of water, or with an organic neem oil to keep the insects at bay. - Source: Internet
  • The Snake Plant is one of several plants NASA chose to study for its powerful air purification abilities. It’s known to combat “sick building syndrome, a condition where people suffer from illness-like symptoms from the building in which they work or live. The Snake Plant, or Sansevieria, is great for offices, warehouses, and trade buildings where chemical products are produced and used. - Source: Internet
  • According to extension.uga.edu, for indoor plants, 20% is considered low humidity, 30-50% humidity is medium humidity and anything above 50% is considered good. - Source: Internet
  • Snake plants are native to tropical West Africa and essential to African culture. Nigerians believe that the plant provides spiritual protection. They use it in a ritual to remove the evil eye. A nasty stare casts a curse on its victims. This succulent is also associated with several African gods, including the god of war. - Source: Internet
  • To further prevent root rot, water your new snake plant only when the soil is completely dry. Generally speaking, good snake plant care requires watering the plant no more than every two to eight weeks, providing less water in the winter during the plant’s dormant period. Remember that overwatering is one of the worst things you can do to this plant, but underwatering isn’t as big a deal, so always err on the side of too little water. Do not water the leaves but only the soil since leaving water buildup on the leaves can cause rotting. Avoid misting this plant. - Source: Internet
  • Following the same steps above for division, identify any pups that are viable for replanting. They should have a few leaves and several roots to grow effectively on their own. You can snap these off the main plant or cut them off with a sharp knife, keeping as many roots with the pup as possible. - Source: Internet
  • Use a pair of clean scissors or plant shears to cut a healthy-looking leaf away from the plant. Take the whole leaf, cutting it at the base. Now, cut the leaf into two-inch sections. - Source: Internet
  • The two main pests you need to watch out for are mealybugs and spider mites. They hinder your plant’s growth and suck the sap from its leaves, wounding them. If they’re left on your plant long enough, they can even kill it. That’s why it’s so important to get rid of these nasty little critters as soon as you spot them! - Source: Internet
  • If you’ve noticed brown tips on your snake plant, then look for other indicators it may need help. If it has curling or falling leaves, you may have an insect problem. Little tiny black bugs called thrips are the most common pest to infiltrate a snake plant. To get rid of them, shake the plant off, clean the leaves with a mixture of water and mild dish soap. You can also use a commercial product. - Source: Internet
  • Let the soil dry between waterings. During the winter, reduce watering to monthly, or whenever the soil is dry to the touch. Err on the side of under-watering; too much water can harm the plant. - Source: Internet
  • Because snake plants don’t like to stay wet, they need a very well-draining potting mix that won’t get compacted. A succulent and cacti mix will work well. If you only have regular indoor plant potting mix on hand, it’s still a good idea to improve the drainage, such as by adding a few handfuls of perlite. - Source: Internet
  • While plants that have become rootbound will eventually need to be replanted, snake plants are notably tough, so you don’t need to be overly concerned about rescuing your plant before its roots get too crowded. In fact, snake plants will generally only bloom if they are a little rootbound. If you notice that new leaves start wilting before they mature, or the older growth starts wilting despite not having been overwatered or exposed to cold, this could be a sign that the plant needs to be repotted. - Source: Internet
  • Because it’s a succulent, the snake plant doesn’t need as much water as other plants; but, it can still get too dry. Browning leaves are a sure sign that your plant is thirsty. You can either use a moisture meter or use a finger check to see how dry your soil has gotten. If it’s dry, then water your snake plant. However, be sure to let it dry out in between waterings. - Source: Internet
  • Snake plants are native to parts of Africa. They are also often referred to as Sansevieria (their genus) or their other common nickname, mother-in-law’s tongue. With about 70 different species, there is really a snake plant for everyone! Thick, thin, tall, short—you name it. - Source: Internet
  • If there is any dead or badly damaged growth you should remove it so that the plant allocates its energy elsewhere. Beyond that, pruning is optional for aesthetic adjustments. If you are wondering how to prune your Laurentii Snake Plant, check out this great video from Joy Us Garden on how to prune your plant. - Source: Internet
  • Snake plants do best in medium light but will do well from low light to bright indirect light. Avoid direct light because the leaves can burn. Note that the bright yellow variegation on the outside edges of the snake plant laurentii may slightly fade in low light. - Source: Internet
  • You might not be watering your Snake Plant enough! This is a durable plant but it still requires some watering when the soil is completely dry. No growth: Snake Plants are very slow growers, especially in low-light conditions. But if you notice your plant seems small in stature and dull in color, try moving it to a spot with a bit more indirect sunlight. You can also try a small amount of fertilizer — just be careful because it can make the soil moister. - Source: Internet
  • Snake plants don’t really need to be fertilized, but if you’d like to fertilize yours, you can use a balanced, general indoor plant fertilizer. Only use it a few times throughout the growing season (spring and summer). They are slow growers and really don’t need much fertilizer. - Source: Internet
  • If you don’t want to remove your plant from its pot, try leaf cutting. Remove one leaf from its roots at the soil line and then cut it into four sections. Put each section into a pot filled with good draining soil and water as necessary. - Source: Internet
  • Here are another two photos of what those rhizomes will look like when they start sprouting back up through the soil. This plant is actually the one in the plywood planter downstairs—the one I divided in half (see later in this post!). So it’s doing really great. In the second picture below, I’ve dug some of the dirt out so you can see what it looks like a bit better. - Source: Internet
  • If you notice any new pups or baby offshoots that the plant has developed, you can plant those separately. As with root division, you’ll need a sharp knife, a clean pot, and cactus potting soil. Pull the root ball out of the pot, locate the offshoot’s root, cut off the pup and plant the cut root end in the cactus potting soil. Water it and place it in a location with indirect bright light. - Source: Internet
  • Snake plants are rather fond of growing root bound so repotting is rarely a necessity. If you plant them in a much bigger pot, they will eventually grow to fill it. If you want them to stay petite, keep them in a smaller pot and cut back leaves or remove rhizomes as needed. - Source: Internet
  • Substrate As with all plants from the steppes and desert, Sansevieria prefer a substrate that is not too damp, permeable, and predominantly mineral-rich. A mixture of equal parts houseplant soil and clay granulate or coarse sand is ideal for snake plants. Ready-mixed succulent or cactus soil can also be used. Ensure there is good drainage when planting in pots in order to avoid waterlogging. Snake plants are also ideal for hydroponics. - Source: Internet
  • The disadvantage of leaf cuttings is that the young plants may deviate from the cultivated form of their mother plant. This is the case with Sansevieria trifasciata ˈLaurentiiˈ. It may happen that the plants develop back to their original form in this way, losing the yellow leaf edge in the process. - Source: Internet
  • Snake plants are incredibly popular houseplants thanks to their ease of care. These succulent plants, native to tropical regions of West Africa, can grow in almost any conditions. Give them low light or full sun, low or high humidity, and even poor-quality soil and they will thrive. The only thing they can’t stand, much like other houseplants, is being overwatered. - Source: Internet
  • Similarly, they’ll do pretty well in a wide range of home temperatures. As long as you’re not freezing, the plant is probably fine. The only thing to keep in mind is to keep your snake plants away from drafty windows and avoid putting them outside during the winter because they don’t like frost or temperatures below 50 degrees Fahrenheit. - Source: Internet
  • Snake plants are very hardy and almost impossible to kill. So, the chances are they can tolerate the pruning very well at any time of the year. However, it is best to do the trimming (and propagation) in the plant’s active growing season, which is spring to early summer. This will ensure a healthy growth after the plant is pruned. - Source: Internet
  • The striking appearance of the snake plant is well-suited to a variety of design styles ranging from classic to contemporary, but the lovely appearance isn’t the plant’s only major selling point. It’s particularly great at improving the air quality in your home, filtering out toxic air pollutants including formaldehyde, benzene, xylene and more. In fact, these plants are unique in that they are one of the only common indoor plants (along with spider plants and peace lilies) that continue to convert carbon dioxide into oxygen at night, which means you may benefit by adding a snake plant on each side of your bed to purify the air while you sleep. - Source: Internet
  • Snake plants are succulent, which means they can tolerate a bit of dryness between waterings and prefer it. So what does this mean exactly? Well, it means that you can get away with watering a snake plant every week or two in the growing season. The best way to check is to do the two-inch finger test. Poke your index finger into the soil a couple of inches, and if it’s dry all the way down, then it’s time to give your plant a thorough watering. Be sure to let it dry out between soakings, but not for too long. - Source: Internet
  • If your leaves are browned at the tips or along the leaves’ edges, check to make sure your plant’s environment is good. Once you’ve established all of its needs are being met, then simply tip the brown and dead spots away from the plant. Leave a tiny edge of brown, so you’re not cutting into the live part of the plant. - Source: Internet
  • If you’ve propagated from leaf cuttings, keep the soil moist until root growth develops. You’ll know roots have started to grow when there is resistance to being pulled from the container. After a few weeks, limit watering until the individual cuttings are ready for transplanting. - Source: Internet
  • Let your plant dry out completely before watering again. Depending on the size of the pot and the location of your plant, this could mean weeks between waterings. Remember that it’s better to err on the side of too little water with snake plants. - Source: Internet
  • The Snake Plant, also known as the Mother-In-Law’s Tongue, is most distinguished by its sharp leaves. While the rigid green leaves outlined in yellow can definitely resemble a snake, that’s not the only reason the plant earned this name. The tough foliage is also said to dissuade snakes from approaching. As we said, this is one badass, durable plant. - Source: Internet
  • (Psst, did you know I have some helpful posts on light? If your home is just downright dark and your snake plant could use more light, check out my post all about grow lights. And, for help with finding just the right natural light for your snake plant, check out my easy guide to natural light.) - Source: Internet
  • Mature snake plants are great candidates for division. Each rhizome can be split into an individual start. This is the best way to enjoy several larger ones more quickly. - Source: Internet
  • Growing snake plant from cuttings is relatively easy. The most important thing to remember is that they can easily rot, so a free draining soil needs to be used. Leaf cuttings are the usual method but probably the easiest way to propagate snake plants is by dividing. The roots produce fleshy rhizomes, which can simply be removed with a sharp knife and potted up. Again, these will need to go into a free draining soil. - Source: Internet
  • Thrips are a common pest infestation that can cause curling leaves. Use a magnifying glass to inspect your plant’s leaves closely. These tiny black bugs are easy to deal with. Cut away severely curled leaves and spray the plant with neem oil or vegetable soap to keep the pests at bay. New leaves will eventually grow. - Source: Internet
  • While they grow slow, the Snake Plant can reach an impressive height if you let them. Many get well over four feet tall. The plant will also spread outwards as new leaves sprout up. The Snake Plant will have to be trimmed at some point to keep it tidy and make sure they are healthy. - Source: Internet
  • When potting, choose a sturdy pot material as strong roots can easily crack and break weak pots. Dracaena is a generally slow grower that rarely needs repotting, but if given ample sunshine, they might grow rapidly and require repotting or dividing. The best time to repot these plants is in the spring. When repotting, always use fresh potting soil, a cactus potting mix, or a mixture of both. - Source: Internet
  • Medium, indirect light is ideal lighting for snake plants, although they can survive in low light and in bright light. Just don’t put them in direct light which could scorch the leaves. Snake plants are everyone’s favorite low-light plant even though they do best in medium light. - Source: Internet
  • Snake Plants are very slow growers, especially in low-light conditions. But if you notice your plant seems small in stature and dull in color, try moving it to a spot with a bit more indirect sunlight. You can also try a small amount of fertilizer — just be careful because it can make the soil moister. Cracked leaves: Cracked leaves are quite normal for the Snake Plant. Don’t worry too much about it! - Source: Internet
  • Brown tips are dead leaf sections that cannot be treated. If you believe the affected areas are unsightly, you can have them removed. Just be careful not to injure the plant further. - Source: Internet
  • Because they’re so small, you probably won’t see the spider mites on your plant, but you will be able to see the damage. Spider mite damage appears as small yellow and brown spots on your plant’s leaves. These mites are related to spiders, so they’ll also leave webbing on your plant that looks similar to a spider web. If you see any warning signs, start spraying your succulent leaves, especially the undersides, with water and insecticidal soap or neem oil. - Source: Internet
  • Terra-cotta pots are preferable over plastic pots because they dry out quicker and more effectively than plastic. Always choose a pot with one or more drainage holes. When repotting, don’t bury snake plants too deep or the new leaves will have a hard time breaking above the soil. Just plant them as deep as they were planted in their prior container. - Source: Internet
  • Set the plant on top of the potting mix in the new terra-cotta pot. The plant should be within two inches of the pot’s rims and not planted deeper than it was previously. You can remove or add soil to make sure it’s the right depth. - Source: Internet
  • The terracotta pot is better in the case of overwatering because of its porous nature. Normal plastic nursery pot takes a lot of time to dry. Water the plant until water drips from the drain holes. Do not water the plant again until the soil dries out completely. - Source: Internet
  • Leave these cuttings to dry out for a few days. Then, fill a planting tray or pot with succulent soil and plant the cuttings bottom side down in the ground. You should keep them in bright, indirect sunlight and mist them with a spray bottle once a day to keep them moist. - Source: Internet
  • An evergreen with gray-green striped leaves. It’s shorter than other varieties but is just as durable. Sansevieria Trifasciata ‘Twisted Sister’: The name of this variety comes from the plant’s curled leaves. It can sometimes resemble a bird nest. - Source: Internet
  • This post shares all about how to propagate snake plants, including how to propagate snake plant cuttings in water and how to propagate snake plants in soil. This post also contains affiliate links, which you can read more about here. Thanks for your support! - Source: Internet
  • Unlike other succulents, snake plants prefer to be a little squished in their pots. You don’t have to repot these guys until they’re busting out. Wait until you see apparent overgrowth signs, like an excessive top-heaviness that makes your plant topple or roots that stick out of the drainage hole. You can expect to repot your snake plants every three to six years. - Source: Internet
  • All the parts of a snake plant contain a mild toxin called Saponin. Getting in contact with the plant juices can cause skin dermatitis or rashes. So, it’s a good idea to use gloves for protecting your hands. If you don’t have them, just make sure not to touch any cut part of the plant. - Source: Internet
  • Snake plants (also known as Mother In Law’s Tongue) are hardy succulents that are super popular as houseplants. But that doesn’t mean they can’t occasionally have health issues that you will need to address. If your snake plant is getting brown leaf tips, it’s a good sign that it might be time to give it some tender loving care. Let’s look at each area that may need addressing to improve your plant’s health. - Source: Internet
  • Propagating snake plants using a single cut leaf can also be done in soil. So if you’re not into water or LECA propagation, soil is an option! To propagate a snake plant in soil using cuttings, snip a leaf off of an existing plant. Cut it off near the soil line. - Source: Internet
  • Now, take that leaf and cut it up into a few different sections. As you’re cutting, make sure that you note which end of each unit is the bottom. The “bottom” of each cutting is the side closest to the roots of the main plant when it was still attached. - Source: Internet
  • Those interested in a DIY option can always make their own propagating mix. A combination of potting soil and perlite or river sand is normally best for these plants as it drains well and dries out quickly. As these plants are succulents, they cannot sit in water, so garden soil or dense potting soil is not recommended. - Source: Internet
  • The snake plant clearly belongs to those plants that can be propagated endlessly. Especially from the two popular species Sansevieria trifasciata and Sansevieria cylindrica you can never have enough. Although the plants do not grow very quickly, but all by itself tirelessly form new runners with young daughter rosettes. Also, from the leaves you can grow many small plantlets without any problems. - Source: Internet
  • To prevent your sansevieria from becoming overwatered in the future, don’t water on a schedule (such as every Tuesday). Don’t give your snake plant small amounts of water at frequent intervals. This type of practice will keep the soil constantly moist, which leads to root rot. - Source: Internet
  • Now that you’ve identified what might be the problem with your snake plant, it’s time to make it look pretty again. Using some sharp pruning snips, clip away any dead or dying spots. This will allow your plant to focus all its energy on its healthy leaves and grow like crazy. - Source: Internet
  • Remove the sansevieria from the pot. Look for firm roots and rhizomes. Some roots may be dry and crunchy and look like straw. Those will not recover, so trim them away with your pruners. Rehydrate the healthy pieces in a container of water for about an hour, then repot them in either fresh or rehydrated soil. - Source: Internet
  • If the plant appears to have overgrown its container, just trimming the leaves might not be sufficient. When you pull the plant out of the pot, the roots are grown big and touching the container sides. This may be the indication that your plant needs root division. You can divide the plant into two or more smaller plants. Click here for a step-by-step way to divide a snake plant. - Source: Internet
  • (formerly Sansevieria cylindrical): This cylindrical snake plant has round, stiff leaves that can reach several feet in length. The leaves arch outward from a central crown. Dracaena trifasciata ‘Laurentii’: This variegated snake plant has creamy yellow leaf margins. To propagate this plant, it must be divided rather than propagated from leaf cuttings. - Source: Internet
  • One way to propagate snake plants is by rhizome. Rhizomes are the whiteish root-like stem structures that connect the mother plant to its new babies. The rhizomes spread just above or below ground and sprout new plants. (I have never had a rhizome grow above the soil in my potted snake plants.) - Source: Internet
  • Nope! Unlike many other houseplants, snake plants do not require additional humidity. In fact, they are extra sensitive to wet leaves and might start to rot if you mist them. There is no need to go above and beyond to provide this plant with humidity, and you definitely should not mist the leaves. - Source: Internet
  • If a prize were available for the most tolerant plant, snake plant (Sansevieria) would certainly be one of the frontrunners. Snake plant care is very straightforward. These plants can be neglected for weeks at a time; yet, with their strappy leaves and architectural shape, they still look fresh. - Source: Internet
  • For me plants are some of the most exciting living beings, even though they live in slow motion. They have fascinating abilities and just so much potential! That’s why I studied organic farming. However, since plants are rather thin on the ground in my city, I often spend time hiking in the nearby mountains at the weekend. In the future I would love to run a farm myself. Favourite fruit: strawberries and gooseberries Favourite vegetable: courgettes - Source: Internet
  • This all comes with a big disclaimer, though—in the winter, it takes a much longer time to propagate any plant. Snake plant included. In the spring and summer—and in the right growing conditions—snake plants can actually grow pretty quickly. So that’s the best time to propagate these plants. - Source: Internet
  • Another factor that may affect your plant’s dryness is a draft. If your snake plant is near a heating duct or warm window, the breeze and heat may dry the soil out prematurely. This is an easy fix; simply move the plant to another location with less of a draft, and this problem will be solved. If you can’t find another spot you like as much, consider getting a small humidifier to keep in the plant’s location. This will add moisture into the air. - Source: Internet
  • In the dormant season, your snake plant may tolerate watering as infrequently as every couple of months. But it’s important to check because if you have it too near a heating duct, it may dry out more quickly than you’d think. If you see your leaf tips starting to brown, then you know your snake plant is thirsty. - Source: Internet
How To Prune A Snake Plant - Can I Cut The Tips Of My Snake Plant Here are a few tips to help you find information about How To Fix A Broken Snake Plant Leaf: - Look for good places to get information about Propagate Snake Plant Cuttings in Water – Propagating Sansevieria Trifasciata. This can be done in libraries, on websites, or even by paid journalists. - When looking for information about Snake Plant Leaves Turning Brown And Soft, it's important to know that there are different kinds of online sources, like Google and YouTube. Social media sites like Facebook and Twitter are also good places to look for information about Snake Plant Folding Leaves.

Video | How To Prune A Snake Plant

To get the best information about how to trim overgrown snake plant, you should read to find out how true each source is.

This article has a few videos from different places about Snake Plant Leaves Turning Brown And Soft that will help you learn more about it. The Internet is a great place to find out about a wide range of things.

## Here are some crucial points concerning Can You Cut Snake Plant Leaves And Replant:
  • How To Prune A Snake Plant
  • How To Trim A Snake Plant
  • How To Trim Snake Plant Leaves
  • How To Trim A Snake Plant Leaf
  • How To Prune Dead Snake Plant Leaves
How To Prune A Snake Plant - How to Care for and Propagate Snake Plants

With so many websites and forums that talk about Snake Plant Propagation, it shouldn’t be hard to find what you need.

Most people are used to getting information about Save a Rotting Snake Plant in a very different way than this. It lets you look at the information about How To Fix A Broken Snake Plant Leaf and how it can be used in more detail. How To Prune A Snake Plant - Can I Cut The Tips Of My Snake Plant ways to put information about How to Propagate Snake Plants: 5 Easy Ways in a way that looks good and is useful. They can be used in business and marketing, and they can also be used to talk about Snake Plant Leaves Pulling Out. So, we also give you some pictures about Snake Plant Folding Leaves.

In the end, this article gives a summary of how to prune dead snake plant leaves. Also talked about are Snake Plant Propagation and Can I Cut The Tips Of My Snake Plant, which you can use to compare how much you know about Save a Rotting Snake Plant.